Seca mVSA 535 Instructions For Use Manual page 141

1. Press the Peripherals tab.
2. Press the seca connect button.
3. In the Connect Mode drop-down menu, select the option
seca analytics 115 TCP or seca analytics 115 UDP.
4. Press the button to reach the seca analytics 115
configuration page.
5. Press the Automatic synchronisation checkbox.
Automatic synchronization is activated.
6. To adopt the settings, proceed as follows:
a) Press the
b) Press the
The settings are adopted.
NOTE
• The data are synchronized as soon as they are changed either on
the device or in the PC software. No further settings are required.
• In the event of conflicts during synchronization, the data of the
seca analytics 115
be overwritten.
button
button
PC software take priority. The device data will
Setting up peripherals • 141
English