Establishing A Power Supply; Charging Rechargeable Battery; Setting The Date And Time - Seca mVSA 535 Instructions For Use Manual

5.3 Establishing a power supply

5.4 Charging rechargeable battery

5.5 Setting the date and time

30 •
seca mVSA 535
1. Plug the device connector of the power supply cable into the connecting
socket of the device.
2. Plug the power supply connector into a power supply socket.
Before you start up the device for the first time, the rechargeable battery for
the monitor must be fully charged.
1. Connect the device to the power supply ➔
2. Press the ON/OFF button of the monitor.
The LED of the ON/OFF button is white.
The charging process starts.
Current charge status is displayed for approx. 15 seconds:
After approx. 5 minutes, the device switches to standby.
The screen goes off.
The LED of the ON/OFF button flashes green.
When the rechargeable battery is fully charged, the device switches off.
The LED of the ON/OFF button goes off.
When you start up the device for the first time, you first need to set date and
time.
1. Connect the device to the power supply.
Establishing a power supply.