Measuring; Measuring With An Active Connection To An Emr System; Measuring With An Interrupted Connection To An Emr System - Seca mVSA 535 Instructions For Use Manual

7.2 Measuring

Measuring with an active
connection to an EMR system
Measuring with an interrupted
connection to an EMR system
70 •
seca mVSA 535
➔

Measuring with an active connection to an EMR system

➔

Measuring with an interrupted connection to an EMR system

If the device has an active connection to the EMR system, proceed as
described in the following sections:
1. ➔
Scanning EMR user ID (recommended)
2. ➔
Scanning patient ID (recommended)
3. ➔
Measuring vital signs
4. ➔
Adding weight and height
5. ➔
Saving measurements in the EMR system
The device provides the option of performing measurements with an inter-
rupted connection to the EMR system. The measurements are temporarily
saved on the device and can be submitted as soon as the connection to the
EMR system is active again.
NOTE
If you are not sure if this function is enabled, contact your
administrator.