Saving Measurements In The Emr System; Submitting The Measurement Directly To The Emr System; Saving Measurement Temporarily And Submitting It Later - Seca mVSA 535 Instructions For Use Manual

7.5 Saving measurements in the EMR system

Submitting the measurement
directly to the EMR system
Saving measurement temporarily
and submitting it later
➔

Submitting the measurement directly to the EMR system

➔

Saving measurement temporarily and submitting it later

➔
Using the Unsubmitted measurements list
To submit a measurement directly to the EMR system, proceed as follows:
1. In the Vital signs tab, press the
2. In the dialog window, press the Submit button.
The measurement is submitted to the EMR system and assigned to the
EMR patient file.
The measurement procedure is complete.
The patient data are removed from the display.
You can temporarily save a measurement on the device, for example to have
the measuring results assessed by a third party. The measurement can then
be submitted to the EMR system. This ensures that only plausible measuring
results are saved in the EMR system.
1. In the Vital signs tab, press the
2. In the dialog window, press the Save button.
The measurement is assigned to the patient ID and saved temporarily on
the device.
The measurement procedure is complete.
The measurement can be assessed in the Unsubmitted measurements
list and submitted to the EMR system ➔
measurements list.
Operation when connected to an EMR system • 75
English
button.
button.
Using the Unsubmitted