Using The Unsubmitted Measurements List - Seca mVSA 535 Instructions For Use Manual

Using the Unsubmitted
measurements list
76 •
seca mVSA 535
➔
Confirm offline measurement (EMR system connection)
➔
Viewing details
➔
Submitting the measurement
➔
Deleting a measurement
In the Unsubmitted measurements list, you can view and assess the
details of a measurement before submitting the measurement to the EMR
system. The list is available in the Patient and Vital signs tabs.
A measurement appears in the list under the following conditions:
• In the Measurements dialog window, press the Save button ➔
measurement temporarily and submitting it
• The measurement cannot be submitted because the connection to the
EMR system is interrupted.
To open the Unsubmitted measurements list, proceed as follows:
1. Log in ➔
Scanning EMR user ID
2. Ensure that the Patient and Vital signs tabs are active.
3. Press the button.
The Unsubmitted measurements list is displayed:
NOTE
Measurements marked yellow (offline measurement) contain uncon-
firmed patient data – because the connection to the EMR system was
interrupted, for example.
later.
(recommended).
Saving