Connecting The Masimo Set Spo Sensor - Seca mVSA 535 Instructions For Use Manual

Connecting the Masimo SET
sensor
NOTICE!
Damage to device, malfunction
The temperature probe can only be pushed right into the probe holder
if it does not have a probe cover on.
► Ensure that there is no probe cover on the temperature probe.
NOTE
The storage compartment on the probe connection provides space
for two packs of probe covers.
SpO
NOTICE!
®
2
Damage to device, malfunction
The SpO
equipment fitted.
► Ensure that the SpO
equipment fitted in your device ➔
parts.
► Follow the user documentation from the sensor manufacturer.
1. If necessary, connect a patient cable to the SpO
the user documentation from the sensor manufacturer.
2. Put the connector for the SpO
the SmartBucket until you feel the connector engage.
NOTE
The holder above the SpO
sensor must be compatible with the SpO
2
sensor is compatible with the SpO
2
sensor/the patient cable in the socket on
2
=>
Press!
connection is for storing the SpO
2
English
measuring
2
measuring
2
Optional accessories and spare
sensor as described in
2
=>
2
Starting up the device • 29
sensor.