Compatibility; User Qualification; Administration/Network Connection; Measuring Mode - Seca mVSA 535 Instructions For Use Manual

Compatibility

2.3 User qualification

Administration/network connection

Measuring mode

2.4 Contraindications

8 •
seca mVSA 535
PC software and use of the
seca analytics 115
• Connection of the device to the
an option: Using the user and patient data of an EMR system and
submitting measuring results to the EMR system
•
seca 360° proximity
scales and measuring rods with an internal interface module or a
external interface module
seca 452
Measuring results for the parameters blood pressure, body temperature,
pulse rate and oxygen saturation are transmitted from the SmartBucket to the
monitor via a USB connection.
The device has a
seca 360° wireless
results from compatible seca scales and measuring rods.
PC software
seca analytics 115
This device (software version 1.0, Build 1163 or higher) is only compatible
with version 1.4 (Build 6657 or higher) of the
There is no downward compatibility with older versions of
software
seca connect 103
This device (software version 1.0, Build 1163 or higher) is only compatible
with version 2.2 or higher of the
downward compatibility with older versions of the
Internal interface module/
This device (software version 1.0, Build 1163 or higher) is only compatible
with interface modules on which firmware version Q2_2020_Build_615 or
higher is installed.
➔
Administration/network connection
➔
Measuring mode
The device may only be set up and incorporated in a network by experienced
administrators or hospital technicians.
The device may only be used by persons with sufficient expertise.
Basic knowledge required for measuring vital parameters is not the subject of
these instructions for use.
Connecting the device to an EMR system affects the measuring sequence
and operation of the device: ➔
system. People operating the device must be informed about these effects.
The device is not intended for permanent monitoring of patients.
The device is not intended for patient monitoring during either transport (for
example, in ambulances or helicopters) or transfer within an institution.
The device is not intended for operation in the vicinity of an MRI device or in a
pressurized chamber.
seca connect 103
connection: Receiving weight and height from
module and can receive measuring
seca analytics 115
software. There is no
seca connect 103
seca connect 103
interface module
seca 452
Operation when connected to an EMR
function
seca directprint
software available as
PC software.
.
seca analytics 115
software.