Measuring Vital Signs; Introduction; Measuring Blood Pressure - Seca mVSA 535 Instructions For Use Manual

6.3 Measuring vital signs

Introduction

Measuring blood pressure

➔
Introduction
➔
Measuring blood pressure
➔
Measuring temperature, oral/axillary (COVIDIEN
➔
Measuring temperature, rectal (COVIDIEN
➔
Entering temperature manually
➔
Reading off pulse rate
➔
Measuring oxygen saturation (SpO
➔
Stopping a measurement procedure
➔
Assigning anonymous measurement procedure to a seca patient file
The Vital signs measurement function is available after the device is switched
on. You can perform measurements without login and without patient
identification.
If you want to assign the measurement procedure to a patient file, we recom-
mend calling up ➔
Calling up a seca patient file
seca patient file a patient file before the measurement. This applies in
particular when repeat measurements for a patient are likely.
You can measure one or more vital signs in one measurement procedure.
Measurement starts automatically after the measuring accessories have been
attached to the patient (exception: blood pressure measurement and in-ear
temperature measurement). Depending on device configuration, pulse rate is
determined using either oxygen saturation or blood pressure.
Weight and height can be recorded by compatible seca measuring devices or
entered manually: ➔
Adding weight and
➔
Preparing the blood pressure measurement
➔
Starting a single measurement
➔
Starting a multiple measurement
➔
Modifying presets
TM TM
FILAC 3000, blue)
TM TM
FILAC 3000 red)
)
2
or creating ➔
Creating a
height.
Operation • 41
English