3.5 Deactivating analysis modules
1. Press the Settings tab.
2. Press the Analysis modules button.
All analysis modules are activated at the factory.
3. Press the checkboxes
to deactivate.
The deactivated analysis modules are no longer displayed in the analysis
➔
Analyzing
measurement.
4. To reactivate analysis modules, press the checkboxes
deactivated analysis modules again.
The reactivated analysis modules will again be displayed in the analysis
➔
Analyzing
measurement.
• Settings you make in this tab are active directly. You do not need to
save or confirm them.
of all the analysis modules you would like
Making settings for measuring mode • 117
English
of the