Seca mVSA 535 Instructions For Use Manual page 31

2. Press the ON/OFF button of the monitor.
The LED of the button is white.
The initial start screen appears.
3. Enter the current date:
a) Press the
b) Use the keypad
c) Press the
4. Enter the current time:
a) Press the
b) Use the keypad
c) Press the
5. Press the
6. Continue operating the device – you have the following options:
► Leave device switched on (recommended): ➔
rechargeable battery
► Perform measurements using the power supply: ➔
► Configure device using the power supply: ➔
Configuring seca mVSA 535
input field
: Enter current date
button: Confirm entry
input field
: Enter current time
button: Confirm entry
button.
Starting up the device • 31
English
Charging
Operation
For administrators: