Receiving Weight And Height (Seca 360° Proximity) - Seca mVSA 535 Instructions For Use Manual

Receiving weight and height
( )
seca 360° proximity
62 •
seca mVSA 535
If a corresponding network connection is set up, weight and height can be
submitted from a seca measuring device via LAN or WiFi.
Workflow LED
LED-Messvorgang
Example display:
Beispiel-Darstellung:
seca 285 measuring station with seca 452 interface module and
Messstation seca 285 mit Interface-Modul seca 452 und seca mVSA 535
seca mVSA 535
1. If you have not yet done so, call up a patient file: ➔
seca patient file.
The measuring device preset by your administrator is reserved
automatically.
The Workflow LED on the preset measuring device is green.
2. Measure the patient as described in the instructions for use for the
measuring device.
3. Submit the measured values as described in the instructions for use for
the measuring device.
The values appear on the
(in this case: Vital signs tab):
You have the following options for continuing:
► Measure more vital signs ➔
► Stop the measurement procedure ➔
procedure
1. Measuring device is reserved
1. Messgerät wird reserviert
2. Measure
2. Messen
3. Submit
3. Senden
in the Weight and Height fields
seca mVSA 535
Measuring vital signs
Stopping a measurement
Receive
Empfangen
Calling up a