Saving Power/Switching Off; Managing Seca Patient Files - Seca mVSA 535 Instructions For Use Manual

Saving power/switching off

Idle time button
Screen off
Standby
10 minutes
Shut down
20 minutes

6.2 Managing seca patient files

1. Briefly press the ON/OFF button of the monitor.
2. The Save energy dialog window appears.
3. Select an option in accordance with the table:
NOTE
The device automatically switches to standby/shuts down if it is not
used for an extended period (phased by idle time)
Device characteristics
• Display switches off
• The LED of the ON/OFF button is white.
• Entries are retained
• User remains logged in
• Patient file remains active
• Measurements continue to run
• Display switches off.
• The LED of the ON/OFF button is green
• Data which have not been saved are lost
• User is logged out
• Patient file is deactivated
•
• Power supply operation:
- When the charging process is complete: Device shuts
down and switches off
• Rechargeable battery operation:
- Device shuts down
- The device switches off
NOTE
If rechargeable battery charge status undershoots a preset limit value
[%], the device shuts down and switches off. It behaves in this way
regardless of the option you select in the Save energy dialog. The
limit value for rechargeable battery charge status is specified by your
administrator: ➔
➔
Creating a seca patient file
➔
Calling up a seca patient file
➔
Editing a seca patient file
➔
Exporting a seca patient file
➔
Deleting a seca patient file
Power management.
English
To remove setting
Press screen
Press screen
Press the ON/OFF
button
Operation • 35