Seca mVSA 535 Instructions For Use Manual page 81

Component (depending on version)
Probe holder (red/blue)
SpO sensor with cable
2
Patient cable for SpO sensor
2
Interval
1. ➔
Removing the probe holder
As required
2. Moisten a cotton bud with a mild soap solution
3. Wipe over all the surfaces of the probe holder
Measuring head and lens:
1. Carefully remove all foreign particles using a cloth
moistened with alcohol (70 % isopropanol)
2. Wipe dry the lens at the tip of the measuring head with
As required
a lint-free cloth (e.g. spectacle-cleaning cloth)
3. Make sure that the lens at the tip of the measuring
head does not have any fingerprints or marks on it
4. Allow the in-ear thermometer to dry completely in air
Follow the manufacturer's instructions for use
Follow the manufacturer's instructions for use
Cleaning
Hygiene treatment • 81
English