5. Make the settings relevant to your network:
► Enter the IP address of the monitor (last three digits must be
different from the PC address)
► Enter netmask (must match the netmask of the PC)
► Enter default gateway (if available)
The
symbol is displayed on the monitor.
The LAN connection is set up.
NOTE
Settings you make in this dialog window are active directly. You do
not need to save or confirm them.
6. Press the
button to confirm your entry.
7. You have the following options for continuing:
► ➔
Setting up a connection to the seca analytics 115 PC software
► ➔
Setting up a connection to the seca connect 103 software
English
Setting up peripherals • 133