Administration Of Seca Patient Files; Evaluating Measured Results; Data Transmission And Network Functions; Compatibility - Seca 525 Instructions For Use Manual

Administration of seca patient files

Evaluating measured results

Data transmission and network
functions

Compatibility

1.3 User qualification

Administration/network connection

Measuring mode

6 •
Measured results are administered in seca patient files. seca patient files can
be created directly on the device. With administrator rights, seca patient files
can be edited directly on the device.
The device can be configured so that the seca patient files of the device are
automatically synchronized with the patient files of the
software.
seca patient files and seca patient databases contain exclusively data neces-
sary for working with seca products or which were determined using seca
products.
The export and import functions of the
used for exchanging data with practice and hospital information systems.
Bioimpedance measurements are evaluated in graphical form based on sci-
entifically-validated formulas. In-house studies by seca generated predictive
formulas for determining the parameters total body water (TBW), extracellular
water (ECW), fat-free mass (FFM) and skeletal muscle mass (SMM) for arms,
legs, torso and the whole body. Further studies generated normal ranges for
the following parameters: bioelectric impedance vector analysis (BIVA), mass
indices (FMI, FFMI), phase angle(φ), fat mass (FM) and skeletal muscle mass
(SMM).
The device can be incorporated in a PC network via a LAN interface or
via WiFi. The device can thus communicate with the databases of
PC software and use the
seca analytics 115
the PC software.
seca analytics 115
The monitor and the measuring mat communicate with one another via WiFi.
If WiFi is unavailable, the infrared interface in the storage compartment of the
monitor is used.
Scales and length measuring devices from the
transmit measured results to the device wirelessly.
This device (software version 1.0) is compatible only with Version
1.4 build 381 or higher of the
downward compatibility with older versions of the
➔
Administration/network connection
➔
Measuring mode
The device may only be set up and incorporated in a network by experienced
administrators or hospital technicians.
The device and the
seca analytics 115
persons with sufficient specialist expertise.
seca analytics 115
seca analytics 115
seca directprint
seca 360° wireless
PC software. There is no
seca analytics 115
seca analytics 115
PC software may only be operated by
PC
PC software can be
function of
system can
.