Argus Omnibus - Barco Argus User Manual

3.2.15 Argus OmniBus

Connecting to Argus Processor
The data connection between P
respective link interface card in the P
round cable or a flat ribbon cable is used:
The cable between P
bent or twisted.
Connecting several OmniBus devices
In the A P there are five PCI slots for link interface cards available. Therefore five A
RGUS ROCESSOR
vices can be connected to one A
Order
The respective link interface cards are inserted in the PCI slots of the A
If more than one A O
RGUS
The Processor expects the primary graphic adapter in the first Argus OmniBus. Therefore the
OmniBus that is connected to the link interface 1 must be equipped with graphic cards.
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
and O
ROCESSOR MNI
[19 9 -24] with the link interface card in the O
ROCESSOR
round cable (left) or flat ribbon cable (right) for connection of P
and O
ROCESSOR
P . Each O
RGUS ROCESSOR
B is connected, they are numbered in the s
MNI US
B is established with a link interface cable. It connects the
US
B is fragile. It may not last under tension, or being
MNI US
B is connected in the manner explained above.
MNI US
RGUS
y are numbered in the sequence of the PCI slots.
Link interface cards in the P
_________________________________________________________________________
3. Getting started
B
MNI US
ROCESSOR
RGUS
P following the network cards.
ROCESSOR
to connect to multiple O
ROCESSOR
quipped with graphic cards.
[6]. Either a
Figure 3-32
and O B
MNI US
O B de-
MNI US
Figure 3-33
B devices
MNI US
3-25