Inserting Additional Main Memory - Barco Argus User Manual

Hide thumbs Also See for Argus:
Table of Contents

Advertisement

6.1.3 Inserting additional main memory

In standard configuration the A
additional memory modules main memory can be increased up to 2 GB.
It is highly recommended to get DIMMs from Barco. Please, refer to section
you use other memory modules Barco can not guarantee for proper and stable system
function.
Please note that the versions AGS-3270-0, AGS-3328-0 and AGS-3328-1 of the Processor use
different memory modules than the versions AGS-3328-2 and AGS-3328-3!
Memory modules are made of delicate electronic components that are extremely sensitive
to static electricity. Ordinary amounts of static from your clothes or work environment can
destroy them. Transport memory modules only in the original packaging as delivered from
the manufacturer. Handle them only by the edges. Do not touch the components. Use a
grounded workplace and wear a grounding wrist strap; at least, discharge your body's static
electricity by touching a grounded surface, e. g., a properly grounded system's metal
chassis.
Open the case as described in section
Locate the memory sockets: The 184-pin slots are lined up parallel and you will find
Because the number of pins is different on either side of the breaks, the module will only fit in the correct
orientation.
Examine the memory modules before removing from the anti static bag. If there is any visible damage, do
not install the module and contact the manufacturer.
Do not remove the memory module from the anti static bag until you are ready to install it. Use a grounded
workplace. Do not lay parts on the anti static bags. Only the insides are anti static.
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
P
is equipped with 256MB or 512MB DDR RAM
RGUS
ROCESSOR
6.1.1 Opening the case of Argus
MB or 512MB DDR RAM main memory. With
Please, refer to section
Processor!
will find them near the CPU.
__________________________________________________________________________
6. Advanced configuration
7.3 Order
codes. If
Slot 1 Channel A
Slot 3 Channel A
Slot 2 Channel B
Slot 4 Channel B
Figure 6-10
Inserting additional memory
k environment can
6-7

Advertisement

Table of Contents
loading

Table of Contents