Table of Contents
Advertisement
The following table describes the available options:
/d:<video channel>
/v:<overlay>
/c:<config.file>
/e:<event>
/k:<event>
/t:<title>
/w:[[v]<width>[,<height>]]
[@<x>,<y>]
/a:s|d|m
/i:<source>
/o:b|m|r|p
/p:<preset>|<stream>
/s:a|n|p|s|5|6
/4
/16
/c
/f
/k
/m
/p
/t
If using the option /c:, take care to indicate the complete absolute or relative path to the
configuration file!
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
Specify video channel
(for description see below)
Specify the overlay plane. Values are:
0
use O
S
, if available
MNI
CALER
1
desktop plane
2
O
S
overlay plane
MNI
CALER
Default is 0.
Specify configuration file
(for description see below)
Open video window that will be closed and the video software will
be exited when <event> is sent. The same event may be associ-
ated with multiple video windows.
Exit all videos started with option /e:<event>
Set video window title. Default is the name of the video channel.
Set size and position of video window. v refers to the actual video
size (without borders).
Set aspect ratio of video window to source, display or manual
unless specified with /w:.
Select the source.
Sets the optimization mode to bandwidth, motion, resolution or
photo CD.
applied to RGB channels:
Selects a RGB preset (Autodetect is 0).
applied to streaming video channels:
selectes the specified stream
Sets the video standard to Auto, NTSC, PAL, SECAM, BW
BW60.
Specify format of video source (4:3, 16:9)
Default is /4 (4:3)
Disable preset cache in the video dialog box (Input).
Display video without a window (title bar, borders). Setting aspect
ratio to source or to display preserves the aspect ratio of the
video, setting aspect ratio to manual keeps the size of the display.
Disable keyboard shortcuts
To be used, if NT 4 Service Pack 3 or later is not installed, or if
orbiting is enabled
Disable video dialog box
Make video window a topmost window
__________________________________________________________________________
Autodetect is 0).
bsolute or relative path to the
4. Operating
BW50 or
Table 4-3
options of video.exe
4-8
Advertisement
Table of Contents
