Table of Contents
Advertisement
6. Advanced configuration
6.2.7 7 Deinstallation of the display driver (agxuninst.exe)
If the Barco display driver shall be removed from the system, the tool agxuninst.exe should be used. This is
necessary if e.g. exchanging AGX G
C
with UGX G
C
or if you want to revert to an earlier ver-
RAPHIC
ARDS
RAPHIC
ARDS
sion of the display driver.
To execute agxuninst.exe, you must be logged in as administrator. The file is located on the Control Room
Suite CD CRS-3045-C in the following directory:
E:\Windows Drivers (OVS-2686)\Windows Drivers X.X
With a double click on the file first a dialog with the question, if the drivers really should be removed. To
uninstall confirm with Yes.
Then the de-installation is running unless you are asked to reboot the computer. Confirm again with Yes.
After this a new display driver must be installed. If you want to revert to an earlier driver release please refer to
the user's manual that was provided with that driver software for an instruction of the installation!
_________________________________________________________________________
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
6-46
Advertisement
Table of Contents
