Table of Contents
Advertisement
Sourcelist
Each section beginning with Sourcelist defines a group of video sources and assigns this group a user accessible
name.
Source names in a sourcelist must be unique, but each source can be used several times, with the same video
type and preset.
Sourcelist
The name inserted in quotes is the user accessible name
"name"
Assigns a video source a name. The video sources are listed in the order they are connected to
the video switcher.
video type
Assigns a video type to the video source. See section Switcher for definition of video types.
preset
Optional. Assigns a preset to a video source. This overwrites autodetection. NTSC, PAL, SECAM,
BW50 and BW60 are possible presets.
Sourcelist "video-a"
{
"Video-1", composite, PAL;
"Video-2", svideo, PAL;
}
Sourcelist "rgb-a"
{
"rgb-1", rgb;
"rgb-2", rgbhv;
}
ROUTES
The section ROUTES defines the routing of source lists to groups of distributed video or single input cards.
The first entry in each line marks the source list, the last expression marks the routed input card or group of dis-
tributed video. Several input cards or groups of distributed video can be listed, separated with a comma. Several
lists can be routed to one input card. If there are any computers defined, the name of the computer has to be
prefixed. Separator after the computer name is a colon.
ROUTES
{
"video-a" to argus-2:frg2684[0];
"Video-a" to dvideo-1;
"rgb-a" to rgb-on-server, argus-2:rgb2774v1[0];
}
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
// defining video sources
_________________________________________________________________________
6. Advanced configuration
6-32
Advertisement
Table of Contents
