Barco Argus User Manual page 29

Depending on the configuration the card is delivered with different adapter cables:
•
Dual-DVI to 2×DVI-D adapter cable:
Digital output for display on projection modules with digital input.
•
Dual-DVI to 2×CRT adapter cable:
Analog output for display on projection modules with analog input.
DDC capable display devices must be connected to the gra
switched on. If they are connected afterwards Argus will not be able to detect them!
Order
The first graphic card in respect to PCI slot numbering identifies itself as primary graphic adapter by lighting the
green LED ED of the respective graphic channel when A
nel, where the system emits diagnostic and status messages during system startup.
For the explicit order of the graphic cards, please refer to the sections
of expansion cards.
AGX and UGX G C
RAPHIC ARDS
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
y devices must be connected to the graphic cards before Argus is
may not be mixed within the same system!
is switched on. The primary graphic adapter is the chan-
RGUS
3.2.15 Argus OmniBus
_________________________________________________________________________
3. Getting started
Figure 3-14 4
Dual-DVI to 2×DVI-D adapter cable
Figure 3-15
Dual-DVI to 2×CRT adapter cable
and 3.2.16 Arrangement
3-12