Table of Contents
Advertisement
3. Getting started
Executing setup.exe
If autorun is enabled on A
the start page of the CD has appeared. If the CD does not start automatically, open
, open
RGUS
the file CRSindex.htm from the CD by means of the Explorer.
On the CD there are different releases of the A
/E
drivers. If using multiple software from this CD, it is rec-
RGUS
OS
ommended to select a release that is part of such a software edition (Section Editions of the Control Room
Suite). If not, you can just install the latest release of the display driver (Section Releases of individual
Products). Follow the links unless the File download dialog appears. Select Run this program from its current
location and confirm with OK.
Figure 3-41
Download the setup of the display driver
ver
The script setup.exe for the installation of display driver and switcher language compiler gets started.
_________________________________________________________________________
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
3-39
Advertisement
Table of Contents
