Barco Argus User Manual page 160

6. Advanced configuration
6.2.10 Redundant network adapter
To obtain a redundant network connection to the LAN the N the A P can be equipped with multiple net-
RGUS ROCESSOR
work cards, that form an AFT (Adapter Fault Tolerance) team. A team consists of two or more network cards of
the same type, either exclusively 10/100 Mbps network cards or exclusively 10/100/1000 Mbps network cards.
At least one of the cards must be a server adapter. The other ones can be server or desktop adapters. Neverthe-
less we recommend for a redundant network adapter to use exclusively server adapters to achieve an easy spare
part handling. g.
Configuration of an AFT team
To configure an AFT team you must be logged in as administrator. Open the device manager (Start -> Settings -
> Control Panel -> System -> Hardware Tab -> Device Manager ... Manager ... ). From the list of devices select Network
Adapters. This starts the Intel PROSet II configuration software:
From the list of available network components select one network card that shell be a member of the team. The
properties of the selected card are displayed on the General tab to the right.
With a right click on the list of network cards open the drop down menu and select Add to Team ->
Create New Team ... . This opens the Teaming Wizard. In the wizard select Adapter Fault Toleranz and click two
times Next >:
_________________________________________________________________________
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004 6-50