Table of Contents
Advertisement
Just click Finish to finalize the operation.
Now you will be asked if you want to reboot the system, click No.
As long as the system finds new graphic channels for which the driver is not yet installed, proceed with the exe-
cution of the Found New Hardware Wizard, see page 3-35.
If the Found new Hardware Wizard appears no longer for Video Controller (VGA compatible), the first part of
the installation is finished. Please proceed with the steps explained in section Executing setup.exe below. Fur-
ther Found new Hardware Wizard Dialogs can be canceled at the moment.
If Argus is operated with Windows NT:
f Argus is operated with Windows NT:
Installing the Argus/Eos drivers for Microsoft Windows NT the DLL msvcrt.dll will be
overwritten, if t
information about the meaning of the old and the new msvcrt.dll can be found at the
readme section below.
Switch on Argus and log in as administrator. Insert the CD Control Room Suite CRS-3045 5 -C in the CD ROM drive.
Now the system is ready to install the display driver under Windows NT
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
, if the included DLL is newer. This may cause other programs to fail. More
_________________________________________________________________________
3. Getting started
3-38
Advertisement
Table of Contents
