Table of Contents
Advertisement
Forbidden PCI slots
If the Multiport I/O Card is used together with the Ethernet Card 10/100 Mbps or the Ethernet Card
10/100/1000 Mbps some restrictions concerning the used PCI slots have to be taken into a
the model of A
.
RGUS
Model of Argus
Argus
AGS-3270
70-0, AGS-3328-0/1
The location of the PCI slots in your A
the A
is labeled on the back of the A
RGUS
6.1.10 Firmware version of the CPU board
If UGX G
C
are used in an O
RAPHIC
ARDS
or higher. To check the firmware version take a look at the label at the side of the CPU board. The printing on the
label looks like this or similar:
XXXXXXXXXXX
X
0.0
X
X 3153-03 X
X
PCX
X
XXXXXXXXXXX
If the firmware is a former release, then it must be upgraded. Please contact the Barco support, see section
Contact.
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
forbidden slots for a combination of Multiport I/O Card and
Ethernet Card 10/100 Mbps or 10/100/1000 Mbps
PCI2 and PCI6
don't use both slots at the same time for Ethernet cards and Multiport I/O
cards.
is described in section
RGUS
housing.
RGUS
U board
B
, then the firmware of the CPU board must be version
MNI
US
PCI slots have to be taken into account, depending on
3.1.1 Argus
Processor. The number of the model of
ware of the CPU board must be version PCX-3153-03
_________________________________________________________________________
6. Advanced configuration
Table 6-9
8.3
6-18
Advertisement
Table of Contents
