Table of Contents
Advertisement
Preset editor
The
allows the creation and adjustment of
Preset Editor
input.
Preset
Enter a name for a new preset
Name
Click this button to enter the correct resolution if the resolution shown di
Change
resolution of your screen mode.
Timing
The horizontal position of the monitor signal in relation to the window is adjusted
Hpos
The vertical position of the monitor signal in relation to the window is adjusted
Vpos
The value represents the actual number of pixels per line
PLL Divider
LL Divider
Adjustment of the phase
Phase
Advanced
Enables the automatic setting of the following parameters:
Set manually
VCO Range
VCO Range
Charge Pump Current
Charge Pump Current
Horizontal Vertical Sync Level (only applicable with D
HV Level
Sync on Green Level (only applicable with D
SoG Level
Scaler settings dialog box
In the Scaler Settings dialog box the settings for RGB processing in the O
Scaler Settings
adjustment of sharpness factor, default is 0
Sharpness
16 6 bpp (RGB 5:6:5, default) or 32 bpp (XRGB 8:8:8:8); (selection depending on input card)
Pixel Format
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
button to enter the correct resolution if the resolution shown differs from the
. Please, refer to section
presets
RGB I
UAL
RGB I
C
UAL
NPUT
S
MNI
CALER
_________________________________________________________________________
4. Operating
4.3.6 Configuration of RGB
Figure 4-11
Preset Editor
C
)
NPUT
ARD
)
ARD
can be set.
Figure 4-12
Scaler Settings dialog box
4-26
Advertisement
Table of Contents
