Table of Contents
Advertisement
CABLES
The section CABLES defines the connection of video sources to video switcher and video switcher to input cards.
The first entry in each line marks the source i.e. the output socket of the video source or the video switcher, the
last expression marks the destination, i.e. the input socket of the video switcher or the input card.
video source
Name of the video source as entered in section Sourcelist in quotes.
video
Name of the video switcher as defined in section Switcher and the socket number. Number-
switcher
ing begins with 1. Name and number are separated by a point.
input card
put card
Name of the input card as defined in Table 6-26 or in section Grabber and the socket number.
Numbering begins with 1. Name and number are separated by a point. If there are any com-
puters defined, the name of the computer has to be prefixed. Separator after the computer
name is a colon.
If a source is connected to more destinations, the destinations can be listed one behind the other, separated by a
comma or for each connection a single line.
CABLES
{
"rgb-1"
"rgb-2"
"Video-1"
"Video-2"
vsw0.4
vsw0.2
vsw1.1
vsw1.2
vsw1.3
}
The compiler
After changing the switcher definition file, it has to be compiled and the data has to be inserted into the registry.
Execute the file slc.exe with the syntax:
> slc.exe <switcher definition file> [-Option] [-Option] ..
If no option is used and the compiler runs without an error through the switcher definition file, the changes in
the registry are made immediately. Files with the registry changes are stored as well in the current folder with
the name: <switcher definition file>.<computer name>.reg for archiving purposes.
Option
?
print this help information
f
print result in text file only. No changes to registry permitted
p
print found paths for all input cards
dev
print found devices
def
print found definitions
c'filename'
select switcher definition file
If multiple Argus Processors are configured, each of them need to be in operation while the
compiler is running. The user has to have administrator rights on each of these Argus
devices.
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
to vsw0.2;
to vsw0.1;
to vsw0.3;
to vsw0.4;
to rgb-on-server.1;
to argus-2:rgb2774v1[0].1;
to argus-2:frg2684[0].1;
to server:frg2684[0].1;
to server:frg2684[1].1;
_________________________________________________________________________
6. Advanced configuration
Table 6-27
6-33
Advertisement
Table of Contents
