Barco Argus User Manual page 133

Vfrequencies
This option has no effect on the display properties of A
UseSoftwareCursor
Whether the display driver is forced to use a software-cursor or not is stored as UseSoftwareCursor in the
registry.
Name UseSoftwareCursor
Typ DWORD Value
Value 0 or 1
Default 0
Effective after rebooting
Please, refer to section 3.5.2 Configuring the display driver
ForceHardwareCursor HardwareCursor
This option has no effect on the display properties of A
SynchronizeEngine
With the SynchronizeEngine entry in the registry the graphic performance can be increased accepting a
longer interrupt time.
Name SynchronizeEngine
Typ DWORD
0 or 1
Value
Default 0
Effective after rebooting
Please, refer to section 3.5.2 Configuring the display driver
UseDeviceBitmaps
Whether device bitmaps (off-screen video memory) are used or not is stored as UseDeviceBitmaps in the
registry.
UseDeviceBitmaps
Name
Typ DWORD
0, 1 or 800000..B000000 hex (8..176MB)
Value
1
Default
Effective after rebooting
Please, refer to section 3.5.2 Configuring the display driver
If the use of device bitmaps is activated, the display driver attempts to store the bitmaps in the physical memory
of the graphic cards. If this memory is not sufficient, system memory is used beyond (Paged Pool), which could
lead to conflicts with system processes. The paged pool is managed by Windows and only released to a specific
amount. It is advisable to increase, this storage space from 0MB (dynamic management) to the maximum
192MB ( 92MB (C000000 hex). This is set in the registry editor under the following path:
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
.
RGUS
for more details (Use software mouse pointer).
.
RGUS
for more details (Synchronize with graphics engine).
8..176MB)
for more details (Use device bi bitmaps).
_________________________________________________________________________
6. Advanced configuration
Table 6-16
Table 6-17
Table 6-18
6-23