Barco Argus User Manual page 82

DFRG
In the section DFRG the names of the video channels are defined. These names can be used to start a video
channel with the video software. Within one DFRG section one single card for basic video display mode can be
listed (e.g. DV1, DV2 and DV3), or multiple card of different PCI segments can be listed to form a distributed
video.
DFRG "distributed_video"
{
frg2684[1],frg2684[3],frg2684[5];
}
DFRG "DV1"
{
BVC-1;
}
DFRG "DV2"
{
BVC-3;
}
DFRG "DV3"
{
BVC-5;
}
Sourcelist
In the section Sourcelist all used sources are listed. In each of the lines there is the name in quotes, followed by
the video type and the video standard. It is possible to have multiple Sourcelists, nevertheless it is necessary to
have at least one of them.
The Sourcelist serves to assign their sources in the section ROUTES to the DFRG channels.
Sourcelist "ListBVC"
{
// "Comp1", Composite,
// "Comp2", Composite,
"Comp3", Composite,
// "Comp4", Composite,
// "Comp5", Composite,
"Comp6", Composite,
"SVid1", SVideo,
"SVid2", SVideo,
// "SVid3", SVideo,
}
ROUTES
In the section ROUTES is defined, which UTES is defined, which Sourcelist is available for which video channels (DFRG). In each line
there is first mentioned the Sourcelist in quotes, followed by the keyword to and finally the DFRG channel.
ROUTES
{
"ListBVC" to distributed_video;
"ListBVC" to DV1;
"ListBVC" to DV2;
"ListBVC" to DV3;
}
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
// define dfrg device with members
PAL; // defining video sources
PAL;
PAL;
PAL;
PAL;
PAL;
PAL;
PAL;
PAL;
_________________________________________________________________________
4. Operating
4-12