Table of Contents
Advertisement
6.1.4 Inserting an additional expansion card
The expansion cards are made of delicate electronic components that are extremely
sensitive to static electricity. Ordinary amounts of static from your clothes or work
environment can destroy them. Transport graphic cards only in the original packaging as
delivered from the manufacturer. Handle them only by their edges and their metal
mounting bracket. Do not touch the components nor the edge connectors that plug into the
expansion slots. Use a grounded workplace and wear a grounding wrist strap; at least,
discharge your body's static electricity by touching a grounded surface, e. g., a properly
grounded system's metal chassis.
•
Please check first the restrictions given in section
expansion card.
•
Open the case of the A
see section
6.1.1 Opening the case of Argus Processor
•
Remove the bracket on the slot you intend to use. Keep the screw you have to remove and keep the bracket
for possible further use.
•
Examine the card before removing from the anti static bag. If there is any visible damage, do not install the
card and contact Barco.
•
Do not remove the card from the anti static bag until you are ready to install it. Use a grounded workplace.
Do not lay parts on the anti static bag. Only the insides are antistatic.
•
If you are inserting a Multiport I/O Card please check the jumper settings and order of the card first, see
section
6.1.9 Multiport I/O
•
Carefully align the card's connectors with the socket and press firmly. The ISA retainer at the end of the card
must be fitted into the respective guide.
1
card
2
bracket
3
guide at ventilation case / ISA retainer
•
Secure the card on the slot with the screw you removed in step 2.
•
If you have inserted a graphic card you have to select the appropriate resolution with a rotary switch on the
board as described in section
•
If you have upgraded a system from AGX G
version of the CPU boa
PU board, please refer to section
Before installing the display driver for the UGX G
must be uninstalled, please refer to section
•
Replace the top cover.
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
P
or A
O
RGUS
ROCESSOR
RGUS
/O Card please check the jumper settings and order of the card first, see
card.
6.1.5 Switching resolution of graphic
RAPHIC
6.2.7 Deinstallation of the display driver
6.1.8 Combination rules
before inserting or exchanging an
B
, depending on the board you want to insert. Please
MNI
US
or
6.1.2 Opening the case of Argus
cards.
C
to UGX G
C
ARDS
RAPHIC
ARDS
6.1.10 Firmware version of the CPU
C
first the display driver of the AGX G
RAPHIC
ARD
__________________________________________________________________________
6. Advanced configuration
OmniBus!
Figure 6-11
Inserting an expansion card
you have to check the firmware
board.
RAPHIC
(agxuninst.exe).
guration
C
ARD
6-9
Advertisement
Table of Contents
