Table of Contents
Advertisement
The setup wizard will guide you through the installation. Click Next to begin the installation:
Installing the Release 2.00 or newer of the display driver under Windows NT will overwrite an older version of
the msvcrt.dll, if in existence on your computer. To keep the possibility to go back to the former state of your
computer cancel the setup now and copy the msvcrt.dll from the folder C:/WINNT/system32 to another locatio
After this you can perform the setup. In case that problems correlated with the newer version of msvcrt.dll occur,
the new version of msvcrt.dll can be replaced manually by the saved older one. Using the old version of
msvcrt.dll prevents the display driver tabs in the display properties dialog box to be shown, see section
Configuring the display
wall. This means the settings for the display driver can not be set by aid of the user interface
but need to be written manually into the registry, see section
The next Window shows notes and actual remarks to the release of the display driver and switcher language
compiler. Press Next if you want to continue or Cancel if you want to save an old version of msvcrt.dll first:
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
/WINNT/system32 to another location.
6.2.1 Editing the
registry.
_________________________________________________________________________
3. Getting started
Figure 3-42
welcome window
3.5.3
Figure 3-43
readme
3-40
Advertisement
Table of Contents
