Table of Contents
Advertisement
3.2.11 RGB Input Card
The RGB I
C
provides the capability of displaying RGB monitor signals. The analog signals are digitized for
NPUT
ARD
further processing in A
RGUS
Standard
The synchronization modes Hsync+Vsync, Csync and Sync-on-Green are supported.
Connectors
The RGB I
C
has two VGA compatible 15
NPUT
ARD
signal to the O
B
whereas RGB Out can be connected to an additional monitor which will receive the looped
MNI
US
through signal.
Order
The order in that the input cards are inserted into one or more O
OmniBus
and
3.2.16 Arrangement of expansion
Specifications
For detailed technical specifications of the RGB I
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
.
VGA compatible 15-pin SubMinD connectors. The RGB In is for connecting the RGB
RGB In
RGB Out
cards.
NPUT
B
devices is given in section
MNI
US
C
please refer to section
ARD
_________________________________________________________________________
3. Getting started
Figure 3-24
connector of RGB I
3.2.15 Argus
7.1 Technical
data.
C
NPUT
ARD
3-20
Advertisement
Table of Contents
