6. Advanced configuration
After the insertion of the input cards you have to configure the additional graphic cards, see
section
3.5.2 Configuring the display
driver, if Argus is operated with Windows NT. If Argus is
operated with Windows 2000/XP you have to install the display driver for newly inserted
cards, see section
6.1.6 Installing display drivers for new
cards.
It might be necessary to re
might be necessary to re-activate the Windows XP operating system after adding or
exchanging components of Argus, please check section
6.1.7 Windows XP
activation.
_________________________________________________________________________
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
6-10