Table of Contents
Advertisement
CABLES
ABLES
In the section CABLES the cabling is exactly described. To each video source defined in
Sourcelist itself) must be assigned the port of an input card. With the B
S-Video or one or two Composite video sources can be connected. For the numbering of the ports please refer to
the sections
3.2.9 Big Video Card
Into one line first the name of the video source in quotes is written followed by the keyword to. Then all input
cards that are connected to that source are listed, separated by comma. To identify the input card the name as-
signed in section Grabber can be used. Appended to that name, separated by a point the connected port must
be identified.
CABLES
{
"SVid1"
to BVC-1.1, BVC-2.1, BVC-3.1, BVC-4.1, BVC-5.1, BVC-6.1;
"SVid2"
to BVC-1.2, BVC-2.2, BVC-3.2, BVC-4.2, BVC-5.2, BVC-6.2;
"Comp3"
to BVC-1.3, BVC-2.3, BVC-3.3, BVC-4.3, BVC-5.3, BVC-6.3;
"Comp6"
to BVC-1.6, BVC-2.6, BVC-3.6, BVC-4.6, BVC-5.6, BVC-6.6;
}
Herewith the switcher definition file is complete. Along two further examples of how the CABLES section would
look like if only three S-Video source would be used:
CABLES
{
"SVid1"
"SVid2"
"SVid3"
}
Respectively six Composite sources would be used:
CABLES
{
"Comp1"
to BVC-1.1, BVC-2.1, BVC-3.1, BVC-4.1, BVC-5.1, BVC-6.1;
"Comp2"
to BVC-1.2, BVC-2.2, BVC-3.2, BVC-4.2, BVC-5.2, BVC-6.2;
"Comp3"
to BVC-1.3, BVC-2.3, BVC-3.3, BVC-4.3, BVC-5.3, BVC-6.3;
"Comp4"
to BVC-1.4, BVC-2.4, BVC-3.4, BVC-4.4, BVC-5.4, BVC-6.4;
"Comp5"
to BVC-1.5, BVC-2.5, BVC-3.5, BVC-4.5, BVC-5.5, BVC-6.5;
"Comp6"
to BVC-1.6, BVC-2.6, BVC-3.6, BVC-4.6, BVC-5.6, BVC-6.6;
}
Dependent on the used sources, the sources mentioned in the Sourcelist must be adopted.
The compiler
When the switcher definition file is edited and saved it must be compiled. Therefore in a command line change
to the following directory:
c:\Program Files\Barco\SLC
The compiler is executed by the command slc.exe. The name of the switcher definition file with the respec-
tive option is appended:
c:\Program Files\Barco\SLC>slc.exe example.vsw –f
The option -f makes sure that there is just an analysis, if the description is correct. The result is showed on the
display but there are no changes to the registry. If the result contains neither errors nor warnings slc.exe can
be started anew, but now without the option -f. Then the description of the switcher definition file is adopted
to the registry.
c:\Program Files\Barco\SLC>slc.exe example.vsw
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
xactly described. To each video source defined in Sourcelist (not the
and
3.2.11 RGB Input
// define wiring for 2 s-video and 2 composite ports
// define wiring for 3 s-video ports
to BVC-1.1, BVC-2.1, BVC-3.1, BVC-4.1, BVC-5.1, BVC-6.1;
to BVC-1.2, BVC-2.2, BVC-3.2, BVC-4.2, BVC-5.2, BVC-6.2;
to BVC-1.3, BVC-2.3, BVC-3.3, BVC-4.3, BVC-5.3, BVC-6.3;
// define wiring for 6 composite video ports
V
IG
Card.
_________________________________________________________________________
C
to each connector either one
IDEO
ARD
4. Operating
4-13
Advertisement
Table of Contents
