Table of Contents
Advertisement
3. Getting g started
3.5 Configuring
3.5.1 Installing the display driver and switcher language compiler
The installation of the A
/E
drivers differs slightly between an A
with Windows NT and with Win-
RGUS
OS
RGUS
dows 2000/XP respectively. For both procedures the CD Control Room Suite CRS-3045-C is needed.
If Argus is operated with Windows 2000/XP
When switching on A
, Log in as administrator. The operating system detects the new graphic cards. For each
m detects the new graphic cards. For each
RGUS
graphic channel the Found New Hardware Wizard
New Hardware Wizard comes up to install the suitable graphics driver. This must be
done for every graphic channel. Every time the Wizard has finished the installation of one channel, you will be
prompted to reboot. Nevertheless it is not necessary to reboot, so this can be ignored.
The Found New Hardware Wizard starts.
Click Next > to continue. On the Install Hardware Device Drivers dialog select Search for a suitable driver for
my device and continue with Next.
_________________________________________________________________________
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
3-35
Advertisement
Table of Contents
