Replacing The Battery Of Argus Processor - Barco Argus User Manual

5.1.4 Replacing the battery of Argus Processor

The battery is located inside of the A
Incorrect replacement of the lithium battery may lead to a risk of exposion!
The lithium battery may be replaced only with an identical battery or with a type
recommended by the manufacturer!
Do not throw lithium batteries into the household waste. They must be disposed of in
accordance with local regulations concerning special waste!
The battery may explode if mistreated. Do not dispose it of in fire! Do not disassemble it or
attempt to recharge it!
Make sure that you insert the battery the right way round. The plus pole must be on the
top!
•
Open the case as described in Section
•
Locate the battery on the main board!
•
Tear back the clamp until the battery lifts up!
•
Replace the lithium battery by a new one of the identical type. Do not use any other type!
•
Replace the top cover.
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
P on the main board.
RGUS ROCESSOR
6.1.1 Opening the case of Argus Processor!
__________________________________________________________________________
5. Maintenance
Figure 5-2
Battery on the main board
5-4