7-4) Use Of Function Menu; 7-4-1) In And Out Of Designs - SunStar SWF/B Series User Manual

7-4) USE OF FUNCTION MENU

7-4-1) In and Out of Designs

When the machine is turned on and the embroidery information loads, press (
following screen:
The sub menus for design input and output are:
1. EMB CALL: calls the design from memory
2. FDD CALL: reads design from the floppy disk drive
3. EXTERNAL INPUT: reads design from an outside source
4. EXTERNAL OUTPUT: outputs design from memory
5. DESIGN DELETE: deletes design stored in memory
6. DESIGN COPY: copies designs stored in memory
7. MEMORY INITIAL: deletes all designs stored in memory
■ EMB CALL: Calling Design from Memory
Ex) Calling design from memory # 8 (number of stitches: 16850).
Use UP and DOWN keys to move the
cursor to "1. EMB CALL"
Press
The size of memory left is indicated.
1. EMB CALL
2. FDD CALL
3. EXTERNAL INPUT
4. EXTERNAL OUTPUT
1. EMB CALL
2. FDD CALL
3. EXTERNAL INPUT
4. EXTERNAL OUTPUT
=
MEMORY FREE STITCH
120000st, 16/99
). You will see the