SunStar SWF/B Series User Manual page 89

For data insert, move the cursor to INS
and press
Using the same procedures, set JUMP
Code
Press
Select "YES" to save and "NO" if
not. Press
■ DESIGN DIVIDE: Dividing the selected design in two
Ex) Dividing design in #5 into two:
sub-design ① from 0 to 1000 stitches and ② from 1001 to 18294 stitches
Call the design in #5 and press
to end
900] 0
901] -28
DEL INS
STITCH 900 is changed to STITCH 901.X=0,
Y=0, and Normal Code was inserted for STITCH
900.
900] 0
901] -28
DEL INS
EDIT DESIGN SAVE ?
[YES]
1. STITCH EDIT
2. DESIGN DIVIDE
3. DESIGN FILTERING
0 N
-3 N
EDIT
0 N
-3 N
EDIT
[NO]