SunStar SWF/B Series User Manual page 95

■ POWER RESUME
In case the frame was moved during blackout, this function moves the frame back to the previous position before the
blackout.
※ The above three functions are about automatic movement of the frame. If you press STOP during the frame
movement, the frame will stop, in which case you can either more the frame to the desired position using the frame
movement key or press START to resume the frame movement.
A. Start point of embroidery
B. Stop point of embroidery
C. Frame moved by POWER RESUME
A. Start point of automatic frame movement
B. Emergency stop by the bar switch (power off)
C. Frame moved by frame movement key
D. Frame movement resumed by the bar switch (power
on)
E. Path the frame would have been taken automatically
without emergency stop