SunStar SWF/B Series User Manual page 83

(4) SEQUIN
This selects the sequin function. The default is "NO" and you can input "1" for "YES."
(5) UP_THD SENSE (Upper thread detection)
This selects the upper thread sensor function and the number of stitches for detection. Bobbin thread is not
detected when set at "0."The default is "1"and you can set up to 10 stitches. (Only upper threa detection can
be set in WHEEL TYPE)
(6) UN_THD SENSE (Lower thread detection)
This selects the lower thread sensor function. Bobbin thread is not detected when set at "0." The default varies
by machine type and the range is 1-10 stitches. (Available only in SPRING TYPE)
Machine Type
series
W
T series
series
U
(7) TRIM LENGTH (Length of thread tail after trimming)
This sets the length of the upper thread that remains in the needle after automatic trimming. The default is
"medium." You can select "short" with "0" and "long" with "2."
(8) AUTO TRIM (Automatic trimming)
This selects the automatic trimming function. The default is "YES"and you can select "NO"to turn off this
function.
(9) AUTO C/C (Automatic color change)
This selects the automatic color change function. The default is "YES" and you can select "NO" to turn off this
function.
(10) MAX SPEED (Maximum speed limit)
This sets the maximum machine speed. The default varies by machine type with the following range. You can
set in the increments of 10 rpm.
Machine Type
series
W
T series
series
U
SWF/ – W1201
SWF/ – WE1204
SWF/ – WE1206 WF912
SWF/ – T1201 T1501
SWF/ – UK1202 UK1502
SWF/ – UK1204 UK1504
SWF/ – UK1206 UK1506
SWF/ – UH1206 UH1506 UH1508
SWF/ -UI1212
Work Material
SWF/ – W1201
SWF/ – WE1204
SWF/ – WE1206
SWF/ – WF912
SWF/ – T1201 T1501
SWF/ – UK1202 UK1502
SWF/ – UK1204 UK1504
SWF/ – UK-1206 UK1506
SWF/ – UH1206 UH1506
SWF/ – UI-1212
SWF/ – UH1508
Contents
Default Set-Up for Lower Thread Detection
TUBULAR
1200
1000
1000
1000
850
1000
0
0
0
4
0
0
0
0
0
CAP BORDER
1000
1000
1000
850
1200 1200
1000 900
900
1000
1000 850
850
750
850 850