■ Design Trace - tracing outline perimeters of the selected design
① This function enables you to quickly check if the X and Y limits of the selected design will fit in the current hoop.
② The arrows in the picture show the path of the design trace. The design will be traced at its furthest points
(maximum and minimum X and Y). If it is too large for the hoop, the frame stops and the message "Frame Limit
Error" will appear on the screen. To use this function, select "Machine Set-Up" "2. Machine SET" and "3. Frame
Limit Set" in the start menu to set the frame limits and set "15. Frame Limit" to "YES" in the EMB FUNCTION.
Start