SunStar SWF/B Series User Manual page 93

■ SPEED CODE: Setting the speed in operation mode
Ex) Slowing down the speed while working on design from #5 (number of stitches: 18294) from STITCH 1000 to
STITCH 2000
Stop the machine at STITCH 1000 by
pressing
Press to change the speed
code
Place the cursor at "2.LOW SPEED"
and press SET. Then press
PREVIOUS and start work. You will
be working at the speed pre-set at
SLOW SPEED in MACHINE
FUNCTION.
Press at STITCH 2000 to
stop the machine.
Press to change the speed.
Place the cursor at "1.HIGH SPEED"
and press . Press
re-start work.
====
====
[CAUTION]
make sure that Angle, Enlarge/Reduce, X-Y
Satin, START ST are set at default before
to
changing the speed code.
SPEED CODE SET
1. HIGH SPEED
2. LOW SPEED
3. RESET
SPEED CODE SET
1. HIGH SPEED
2. LOW SPEED
3. RESET
====
====