SunStar SPS/B-1306 SERIES User Manual
  1. Manuals
  2. Brands
  3. SunStar Manuals
  4. Sewing Machine
  5. SPS/B-1306 SERIES
  6. User manual
SunStar SPS/B-1306 SERIES User Manual

SunStar SPS/B-1306 SERIES User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

S S U U N N S S T T A A R R M M A A C C H H I I N N E E R R Y Y C C O O . . , , L L T T D D . .
S S U U N N S S T T A A R R M M A A C C H H I I N N E E R R Y Y C C O O . . , , L L T T D D . .
USER ' ' S
MANUAL
SPS/B-1306 SERIES
SPS/A-1306 SERIES
SPS/B-1507 SERIES
SPS/A-1507 SERIES
SPS/B-1310 SERIES
SPS/A-1310 SERIES
E E l l e e c c t t r r o o n n i i c c a a l l l l y y C C o o n n t t r r o o l l l l e e d d
P P a a t t t t e e r r n n S S e e w w i i n n g g M M a a c c h h i i n n e e
( ( M M e e c c h h a a n n i i c c a a l l P P a a r r t t ) )
1) FOR AT MOST USE WITH EASINESS,
PLEASE CERTAINLY READ THIS MANUAL
BEFORE STARTING USE.
2) KEEP THIS MANUAL IN SAFE PLACE
FOR REFERENCE WHEN THE MACHINE
BREAKS DOWN.
MME-041129

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPS/B-1306 SERIES and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SunStar SPS/B-1306 SERIES

Summary of Contents for SunStar SPS/B-1306 SERIES

  • Page 1 USER ’ ’ S MANUAL SPS/B-1306 SERIES SPS/A-1306 SERIES SPS/B-1507 SERIES SPS/A-1507 SERIES SPS/B-1310 SERIES SPS/A-1310 SERIES E E l l e e c c t t r r o o n n i i c c a a l l l l y y C C o o n n t t r r o o l l l l e e d d...
  • Page 2 1. Thank you for purchasing our product. Based on the rich expertise and experience accumulated in industrial sewing machine production, SUNSTAR will manufacture industrial sewing machines, which deliver more diverse functions, high performance, powerful operation, enhanced durability, and more sophisticated design to meet a number of user’s needs.
  • Page 3 Organization of the Pattern S/M Model SPS / B - 1 3 0 6 - H S - 1 0 SunStar Pattern System Feeding Frame Series Type A: Motor belt-type B: Motor direct drive-type X : 130mm Stitch Type Sewing Area...

  • Page 4: Table Of Contents

    CONTENT 1. Machine Safety Regulations 1) Machine Transportation 2) Machine Installation 3) Machine Repair 4) Machine Operation 5) Devices for Safety 6) Caution Mark Position 7) Contents of Marks 2. Specifications of the Machine 3. Structure of the Machine 1) Names of each parts of the machine 2) Inside structure of control box 4.
  • Page 5 7. Causes of Break-Down and Throubleshooting 8. SPS/B(A)-1306(1507)-GS-10 1) Machine specifications 2) How to thread the upper thread 9. SPS/B(A)-1306(1507)-HP(GP)- 1) Machine specifications 2) How to attach the needle 3) How to hook the upper thread 4) How to hook the lower thread 5) Adjusting the spring on the upper side of the shuttle 6) Adjusting the moving knife and the fixed knife 10.

  • Page 6: Machine Safety Regulations

    MACHINE SAFETY REGULATIONS Safety instruction on this manual are defined as Danger, Warning and Notice. If you do not keep the instructoins, physical injury on the human body and machine damage might be occurred. Danger : This indication should be observed definitely. If not, danger could be happen during the installation, conveyance and maintenance of machines.

  • Page 7: Machine Operation

    1-4)Machine SPS/B(A)-1306(1507, 1310) Series are made for industrial use to perform pattern Operation sewing for fabrics or its similar materials. Please observe the following principles. ⓐ Read the manual to understand on the operation of machine perfectly. ⓑ Wear suitable clothes and cap for safe operation. ⓒ...

  • Page 8: Caution Mark Position

    1-6)Caution Mark Caution mark is attached on the machine for safety. Position When you operate the machine, observe the directions on the mark. Position of Warning Mark CAUTION 경 고 Do not operate without finger guard and safety devices. Before threading, changing bobbin and needle, cleaning etc.

  • Page 9: Specifications Of The Machine

    SPECIFICATIONS OF THE MACHINE SPS/B-1306(1507) SPS/A-1306(1507) Series type (Motor direct drive-type) (Belt drive-type) X (wide)× Y(length) : 130mm×60mm 1306 Sewing Area X (wide)× Y(length) : 150mm×70mm 1507 Sewing Speed Max. 2,500 spm(Stitch Length : 3mm or shorter) Stitch Length 0.1~12.7 Needle DP×17, DP×5 Needle Bar Stroke...

  • Page 10: Structure Of The Machine

    STRUCTURE OF THE MACHINE 1) Names of Each Parts of the Machine Pause Switch Thread Stand Operation Box Upper Feed Plate Lower Feed Plate Power Switch Control Box Upper feed plate pedal Manual pedal Sewing pedal...

  • Page 11: Inside Structure Of Control Box

    2) Inside Structure of Control Box ① SPS/B-1306(1507, 1310) Floppy Disk Driver Step Motor Drive Board Power Main Board Shaft Motor Drive Board 386 CPU Board IO Board Transformer...
  • Page 12 ② SPS/A-1306(1507, 1310) Floppy Disk Driver Step Motor Drive Board Power Main Shaft Board Motor Drive Board 386 CPU Board Transformer IO Board...

  • Page 13: Installation Of The Machine

    INSTALLATION OF THE MACHINE 1) Environment for Machine Installation A. Do not use the machine where the voltage is over regular voltage ±10% to prevent accidents. B. Check the indicated pressure of the devices that use atmospheric pressure such as the air cylinder to prevent any accidents from occurring.
  • Page 14 D. Stand the machine as shown in the picture, and then fix the machine on the table after inserting the fixing bolts into the hinge metal holes of point ①. [ Danger ] Since the machine is not perfectly installed on the table, extreme care is needed when you make the machine stand up not to have any accident occurred.
  • Page 15 G. As seen in the Fig. adjust the position of idler to adjust the tension of belt. (A Series) Idler [ Fig. 7 ] H. Method of Cable Connection [ Caution ] ① Please turn off the power when you insert or pull out the cable connector. ②...
  • Page 16 ② SPS/A-1306(1507, 1310) Power Supply Cable Main Motor Cable Encoder Cable Synchro Cable Step Motor Cable Air Pressure Control Cable Green Pedal Input Cable Sensor Input Cable Black Solenoid Output Cable Operation Cable ※ The number in parentheses indicates cable number. See the Electric Connection Wiring Diagram.

  • Page 17: The Assembly Of Peripheral Parts

    J. Be sure to connect the earthing conductor(green) between the sewing machine and the motor. And also, connect the earthing conduct or between the control box and the motor.(A Series) Conductor [ Fig. 11 ] K. After the cable connections between the machine and the control box is finished, fix the cable wiring under the table as shown in the picture.
  • Page 18 B. Install the safety plate on the side of the face plate. Face Plate [ Caution ] For safety, have the plate on during operation. Safety Plate Ass’ y [ Fig. 14 ] C. Connect a plug of pedal switch with control box. Pedal Switch [ Fig.
  • Page 19 E. Install the Thread stand onto the table. [ Fig. 17 ]...

  • Page 20: Preparations Before Operating The Machine

    PREPARATIONS BEFORE OPERATING THE MACHINE 1) How to Supply Oil A. Check the amount of oil left in the oil tank which is installed on the arm and supply oil sufficiently. [ Caution ] Be sure to supply oil when operating the machine for the first time or when the machine has not been used for a long time.

  • Page 21: How To Install The Needle Bar

    D. Open the hook cover and supply oil till the shuttle race ring is surrounded by oil. Put the hook cover back on after finishing. Shuttle Race Ring [ Caution ] For safety, keep the hook cover covered during operating. Hook Cover [ Fig.

  • Page 22: How To Thread The Upper Thread

    3) How to Thread the Upper Thread A. Hook the upper thread as shown in the following picture after setting the thread take-up lever at the highest position. As with the needle bar thread guide, hook the thread as shown in picture for heavy materials. (SPS/A(B)-1306(1507, 1310)-HS) Picture ①...

  • Page 23: How To Take The Bobbin Case On And Off

    5) How to Take the Bobbin Case On and Off Hold knob ① of the bobbin case and push into the shuttle until a click sound is heard. [ Caution ] If you start operating the machine when a bobbin case is not perfectly installed, thread can be tangled of the bobbin case would be protruded.

  • Page 24: How To Wind The Lower Thread

    7) How to Wind the Lower Thread A. Insert the bobbin into thread winding drive shaft ② on thread winding base ① which is installed on the upper top. B. Operate the machine after sticking the thread winding lever ③ to the bobbin. C.

  • Page 25: Model Of Transformer By Voltage And Setup Of Voltage

    10) Model of Transformer by Voltage and Setup of Voltage A. Then inner structure is as below when the cover of electronically-controlled pattern sewing machine is removed. B. Confirm if the position of input vlotage change connector on power board (Refer Fig. 32) and used transformer are properly selected according input voltage like Table 1 Position of Input Voltage Model of Used...

  • Page 26: Caution When Using The Floppy Disks

    11) Caution when Using the Floppy Disks Observe the following principles thoroughly when you treat floppy disks. [ Caution ] Use the identified floopy disks after formatting when you get them in market. ① Do not put floppy disks near magnetic-related materials such as television. ②...

  • Page 27: How To Repair The Machine

    HOW TO REPAIR THE MACHINE The machine is set to be the best condition at the factory. Do not make any discrete adjustments on the C C a a u u t t i i o o n n machine and replace genuine parts approved by the company only. 1) Adjusting the Height of the Needle Bar DP×5 ①...

  • Page 28: Adjusting The Lower Shaft Gear And The Rocking Shaft Gear

    3) Adjusting the Lower Shaft Gear and the Rocking Shaft Gear A. Unfasten screws ① and ②. B. While having the upper shaft turning, move the rocking shaft gear in the direction of the arrow to the position where it will move easily without load. [ Caution ] The machine may not operate when the rocking shaft gear in not in the right position.

  • Page 29: Adjusting The Height Of The Feed Plate

    5) Adjusting the Height of the Feed Plate After unfastening the lifting lever control plate screws ② on each side of the feed bracket ①, raise the control plate in ② direction A to lower the upper feed plate ③ and lower the control plate in direction B to heighten.
  • Page 30 C. Adjustment of Presser Foot Adjusting Arm a) Unscrew location link stopper screw to make space between location link stopper ④ and fixing stud screw of presser foot motion link ③. b) After unscrewing fork link joint screw ① and placing stud screw of presser foot link to the right side of presser foot adjusting arm, fasten stud screw ②...

  • Page 31: Adjusting The Parts For The Presser Plate

    7) Adjusting the Parts for the Presser Plate Place the left ① and right ② presser plate arms closer to each other so both arms will press the presser plate shaft pin ③ equally and tighten screw ④. If thin material is to be sewed or if the presser is too weak, adjust the presser foot solenoid ⑤...
  • Page 32 B. How to Set the Thread Release Stopper ⓐ Remove the thread release return spring. ⓑ After unfastening the thread release stopper screw, adjust the trimming drive link and the thread release lever pin 0.3mm apart from each other. Then, attach the arm to the thread release stopper completely. When the thread release stopper is pushed to the right, the space between the trimming drive link and the thread release lever pin is reduced.

  • Page 33: Adjusting The Parts For The Wiper

    9) Adjusting Parts for the Wiper A. Adjusting the Wiper Position ⓐ Unfasten the wiper rotary shaft collar screw ① and the wiper crank screw ② when the needle tip is 19.5mm above the needle plate ⓑ Press the wiper rocking link ③, then adjust the wiper shaft ④ so the wiper and the needle is about 10mm apart from each other.

  • Page 34: Adjusting The X-Y Parts

    10) Adjusting the X-Y Parts A. Adjusting the tension of the X-timing Belt ⓐ Move the race table ① to the left. ⓑ Use the tension gauge to adjust the X-tension adjustment bolt ② so that 800g of load is applied 4mm longer on the timing belt.

  • Page 35: Adjusting The Trimming Parts

    11) Adjusting the Trimming Parts A. Setting the position of the trimming Cam Set the upper shaft collar and the trimming cam 2.5mm apart from each other and place the trimming cam where the trimming cam carving line accords with the upper shaft carving point. Then, tighten screw ①. [ Caution ] If the trimming cam is not placed in the right position, the trimming operation may not be made correctly or the machine may be lock.
  • Page 36 C. Setting the trimming shaft in place ⓐ Unfasten the trimming drive link screw and the trimming shaft collar screw. ⓑ Make the trimming shaft tip accord with part of the arm. ⓒ Tighten the screws. [ Caution ] If the position is not adjusted appropriately, trimming may not be operated correctly or the machine may be lock. Thread Trimmer Cam Thread Trimming Driving Link...
  • Page 37 E. Setting the Thread Trimming Solenoid in Place ⓐ After unfastening the thread trimming solenoid bracket screw, have the trimming shaft and the thread trimming solenoid rotary link 0.5mm apart from each other and tighten the screw back on. ⓑ Unfasten the thread trimming solenoid rotary link screw and drive the thread trimming solenoid rotary link manually to move the trimming shaft collar 6.8mm in the direction of the arrow.

  • Page 38: Adjusting The Main Thread Control Device

    12) Adjusting the Main Thread Control Device Thread Take-up A. When the tension control nut ① of the thread control Spring device is turned clockwise, the upper thread is tightened and becomes loose as the nut is turned counterclockwise. Adjust the tension according to the sewing conditions such as material, thread, number of stitches etc.

  • Page 39: Adjusting The Winding Device

    15) Adjusting the Winding Device Bobbin A. To adjust the winding capacity of the bobbin, use the beginning position of the winding control plate, and after unfastening the screw, turn the plate in direction A for large winding capacity and turn in direction B for small winding capacity.

  • Page 40: Mounting The Direct Motor And Adjusting Method (B Series)

    B. Adjusting the position of position detector ⓐ Adjust the position of take-up lever to be same as Fig. 63 by turning the pulley. At this time, the white carving sign of pulley should be straight line with the carving sign of arm.

  • Page 41: How To Set The Original Point Of X-Y

    18) How to Set the Original Point of X-Y A. How to set the original point of the X-axis ⓐ Remove the lower feed plate, X-fixed cover, and transport cover. ⓑ Place the upper feed plate center in the middle of the X-axis direction. ⓒ...

  • Page 42: Exchanging The Fuse

    19) Exchanging the Fuse ■ To prevent from electrice shook, turn off the power and wait 5 minutes, then open the cover ■ Be sure to turn off the power and exchange into the fuse of the designated quantity after opening the cover of control box. Caution 8 Fuses are used.

  • Page 43: Causes Of Break-Down And Throubleshooting

    CAUSES OF BREAK-DOWN AND TROUBLESHOOTING Type of Breakdown Cause Troubleshooting Loosing of belt tension and damage Adjust the belt tension or exchange it on belt Check the fuse shortage of main shaft Error on operation or drive Fuse shortage for main power or drive motor in a controller box or exchange circuit of machine...
  • Page 44 Type of Breakdown Cause Troubleshooting Clean up the take-up lever spring and detecting plate. Adjust the tension of take- Bad connection between take-up lever spring and detecting plate up lever spring and connecting condition of Ineffective sense of upper detecting plate thread Bad connection of wire with thread Reconnect the wire with thread sensor...

  • Page 45: Sps/B(A)-1306(1507

    SPS/B(A)-1306(1507)-GS-10 1) Machine Specifications It is the same as the specification of SPS/B(A)-1306(1507)-HS-10 2) How to Thread the Upper Thread After placing the thread take-up at the highest position thread the thread as indicated in the picture below. Thread the thread as shown in picture A for the needle bar thread guide. Picture A...

  • Page 46: Sps/B(A)-1306(1507)-Hp(Gp)

    SPS/B(A)-1306(1507)-HP(GP)- 1) Machine Specifications SPS/B-1306(1507) SPS/A-1306(1507) Series type (Motor direct drive-type) (Belt drive-type) 1306 X (wide)× Y(length) : 130mm×60mm Sewing Area 1507 X (wide)× Y(length) : 150mm×70mm Sewing Speed Max. 2,500spm (Stitch Length : 3mm or Less) Stitch Length 0.1~12.7mm Needle DP×17, DP×5 Needle Bar Stroke...

  • Page 47: How To Attach The Needle

    2) How to Attach the Needle After unfastening the needle fixing screw on the needle bar, have the long groove of the needle face the back and push the needle till it touches the needle insertion hole and then tighten the needle fixing screw. Screw [ Caution ] For type SPS/B(A)-1306(1507)-HP(GP)-...

  • Page 48: Adjusting The Spring On The Upper Side Of The Shuttle

    5) Adjusting the Spring on the Upper Side of the Shuttle A. Adjusting the spring on the upper side of the shuttle. After removing the lower feed plate and the needle plate from the machine, unfasten the upper side spring screw. Place the spring on the upper side of ①...

  • Page 49: Sps/B(A)-1306(1507)-Hs(Gs)-20(21, 22-1, 22, 23) And Sps/B(A)-1310-Hs

    1 1 0 0 SPS/B(A)-1306(1507)-HS(GS)-20(21, 22-1, 22, 23) and SPS/B(A)-1310-HS(GS)-20(22) 1) Machine Specifications SPS/B-1306(1507, 1310) SPS/A-1306(1507, 1310) Series type (Motor direct drive-type) (Belt drive-type) 1306 130mm(wide)× 60mm(length) Sewing Area 1507 150mm(wide)× 70mm(length) 1310 130mm(wide)× 100mm(length) Sewing Speed Max. 2,500spm (Stitch Length : 3mm or Less) Stitch Length 0.1~12.7mm Needle...

  • Page 50: How To Attach The Parts For Air Pressure Control

    2) How to Attach the Parts for Air Pressure Control [ Caution ] ② For safety, work with the power cut off. ① A. Connect air hose ② to quick joint socket ①. B. Contract quick joint socket ① and quick joint plug ③. ③...

  • Page 51: How To Adjust The Up And Down Movement Of The Upper Feed Plate

    B. How to adjust the height of the slider base Presser Plate Unfasten the slider base screw ① and adjust the slider base to the appropriate height. Then tighten Slider Base the screw back on firmly. ① ② C. How to adjust the height of link plate B Unfasten link plate B screw ②...

  • Page 52: How To Use The Manual Pedal Switch

    6) How to Use the Pedal Switch A. SPS/B(A)-1306(1507, 1310)- ⓐ If you step on the right pedal ①, the upper feed plate descends to hold the sewing material. ⓑ After the upper feed plate descends, if you step on the left pedal ②, the machine starts sewing. ②...
  • Page 53 C. SPS/B(A)-1306(1507, 1310)- ⓐ Check the parameter, related to general sewing (function No.60), is set to ‘2’ . If not, please set the parameter to ‘2’ . (Refer to 7.29) Change of parameter related to general sewing. ⓑ The pedal switch has three pedals, the right one ① moves the right upper feed plate, the intermediate one ② moves the left upper feed plate and the left one ③...

  • Page 54: Air System Ciruit Diagrams

    7) Air System Ciruit Diagrams ▶ ▶ [ SPS/B(A)-1306(1507, 1310)-HS-20 ]...
  • Page 55 ▶ ▶ [ SPS/B(A)-1306(1507)-HS-21 ]...
  • Page 56 ▶ ▶ [ SPS/B(A)-1306(1507, 1310)-HS-22 ]...
  • Page 57 ▶ ▶ [ SPS/B(A)-1306(1507)-HS-22-1 ]...

  • Page 58: Setting And Adjustment Of Sps/B(A)-1310

    8) Setting and Adjustment of SPS/B(A)-1310 A. Machine Composition Y-motor Base Y-drive Motor Y-feed Shaft Y-feed LM Guide Upper Feed Plate Lower Feed Plate [ Fig. 86 ] B. The Y-shaft Original Point Setting ⓐ Disassemble the Y-motor base cover. ⓑ...
  • Page 59 C. Adjusting the Tension of the Y-timing Belt ⓐ Enter the data as below by using the sound wave tension meter (based on UNITTA U-505 ). Weight : 4gf/m Wide : 12mm/#R Span : 155mm ⓑ Disassemble the Y-motor base cover. Adjust the sound wave tension meter to show 7~8kgf as value when striking the center of the pulley with fingers or similar tools.

  • Page 60: Drawing Of Table

    1 1 1 1 DRAWING OF TABLE ① ① SPS/B-1306(1507)
  • Page 61 ② ② SPS/A-1306(1507, 1310)

This manual is also suitable for:

Sps/a-1306 seriesSps/b-1507 seriesSps/a-1507 seriesSps/b-1310 seriesSps/a-1310 series

Table of Contents

Save PDF