SunStar SWF/B Series User Manual page 105

[CAUTION]
1. Middle offset point and offset point may be the same.
2. Offset data is automatically deleted when you call a new design.
Ex) Offset set-up
1. Start point: X = –300, Y = 500
2. Middle point: X = 600, Y = 1500
3. Offset point: X = 800, Y = 2000
Press in the start menu
Set X = –300, Y = 500 using
the frame movement key and press
1. Start point
2. Stitch for offset
3. Stitch for finish of embroidery
4. Middle offset point
5. Offset point
a) ④ : path at the start of the embroidery
b) ① → ③ → ① : Movement from the offset stitch to the
offset point
c) ② → ③ : path after the embroidery is finished
X : 0,
=== START POINT
=> FRAME MOVE
X : 0,
=== MIDDLE OFFSET
=> FRAME MOVE
Y : 0
===
Y : 0
===