SunStar SWF/B Series User Manual page 67

(6) X SATIN:
[Changing the satin width 2mm on each side]
Sets the width of a satin stitch in the X direction. The setting can increase in increments of 0.1mm on each side.
The default is 0 and the range is from 0 to 5.
(7) Y SATIN:
Sets the width of a satin stitch in the Y direction.
[Note] When a new design is called into the memory, all settings revert to the default setting.
Ex) Calling and edit the design in #5
X SCALE: 150%
Y SCALE: 120%
ANGLE: 45°
Mirror: Y
Select the design in #5 (see 7.4.1 In &
Out of Designs).
Press
2mm 2mm
START ST: 100 stitches
X SATIN: 3
Y SATIN: 2
<After interval setup>
NO :
STITCH :
COLOR :
JUMP :
1] X_SCALE :
2] Y_SCALE :
3] ANGLE :
4] MIRROR : NO MIRROR
5
18294
7
7
100[%]
100[%]
0