Input "40" for X design interval and
press
Input "-40" for Y design interval and
press
Input "1" to select X as priority and
press
For design interval, press UP a few
times.
Use the cursor to go to the next screen.
====
REPEAT SETTING
4] Y Design Interval
-300 - > +300[mm]
=>
====
REPEAT SETTING
5] Y/X Priority
Y(0), X(1)
=>
====
REPEAT SETTING
6] Design Interval
JUMP(0), STOP(1)
=>
====
REPEAT SETTING
4] Y Design Interval
-300 - > +300[mm]
=>
You can check or change the set-up data.
The data in the brackets is the set-up data.
====
(
0)
====
(
Y)
====
( JUMP)
====
(
-40)