SunStar SWF/B Series User Manual page 21

12) AUTOMATIC DETECTION OF UPPER AND LOWER THREAD BREAKS
The machine automatically stops when the upper thread breaks or the lower thread is out of the needle.
13) AUTOMATIC RETURN TO STOP POINT IN UNEXPECTED BLACKOUT
When the power fails unexpectedly, the frame moves back to the exact point where the stitching stopped. This helps
reduce the number of defects.
14) 3.5" FLOPPY DRIVE (EMBEDDED)
A 3.5" floppy drive is embedded in the operation panel for you to read or store designs. You can use both 2DD and
2HD disks.
15) EDITING
You can delete, change, or insert stitch data and function codes (jump, finish, trimming).
16) MACHINE STOPPAGE
The screen will indicate why the machine has stopped.
17) RPM
The screen indicates rpm.
18) FRAME SPEED SET-UP
You can adjust the frame speed to high, medium, or low.
19) UNUSED MEMORY
The screen indicates the memory available for use.
20) TAPE CODE COMPATIBILITY
2-binary and 3-binary tape codes can be edited.
21) 800X600 COLOR LCD MONITOR (OPTIONAL)
You can install a 800X600 color LCD monitor onto your operation panel for easier reading of data.
22) CODES FROM OTHER BRANDS
The machine can automatically read designs of various formats stored in the floppy disk. These formats include
SST/ DST, DSB, DSZ/ TAP/ FMC, FOR/ ZSK/ 10O/ EXP.