SunStar SWF/B Series User Manual page 7

1-4) MACHINE
OPERATION
CAUTION
1-5) MACHINE REPAIR
DANGER
Observe the following to avoid damage to the machine or functional
failures.
1) Do not put any objects on the table of the embroidery machine.
2) Do not use a bent or damaged needle.
3) Change your needle plate when switching from caps to flats and vice versa.
Only SWF-trained and selected repair engineers should do repair work.
1) Before cleaning or repairing the machine, make sure the main power is
turned off and wait for 4 minutes so that the machine electricity is
completely discharged.
[ Notice ]
It takes about 10 minutes after turning off the main switch before the electricity
is fully discharged from X/Y main shafts and drive box.
2) Do not change the settings or any parts on the machine without confirmation
from SWF. Such change may cause safety accidents.
3) Use only SWF parts when repairing your machine.
4) Replace all safety covers when you are finished with your cleaning or
repairs.