SunStar SWF/B Series User Manual page 74

■ Optimize Trace
① This enables you to quickly check the outline of the selected design by tracing the outline.
② The arrows in the picture show the path of the trace. The design will be traced at its furthest points. If it is too large
for the hoop, the frame stops and the message "Frame Limit Error" will appear on the screen. To use this function,
select "Machine Set-Up" "2. Machine SET" and "3. Frame Limit Set" in the start menu to set the frame limits and
set "15. Frame Limit" to "YES" in the EMB FUNCTION.
Start