SunStar SWF/B Series User Manual page 98

■ MACHINE SET: Sets frame limit.
Select "2.MACHINE SET," press
1. MACHINE SET
It sets parameters for machine set-up (selects CUT NEEDLE).
(1) CUT NEEDLE
This is for cuttiing selected to cut sewing materials, not embroidery materials.
※ Needle designated for CUT NEEDLE does not support thread detection or trimming functions.
Ex) Designating needle #6 for CUT NEEDLE
Move the cursor to "2.CUT NEEDLE"
and press
When the cursor blinks at needle #1,
press "1" to designate CUT NEEDLE.
The cursor will then automatically
move to needle #2.
Move the cursor to needle #6 using "0"
With the cursor at needle #6, press "1"
to designate it for CUT NEEDLE
and you will find the following screen: The function has three sub-menus.
1. MACHINE SET
2. FRAME ORIGIN
3. FRAME LIMIT SET
CUTTING NEEDLE SET
1 => USE, 0 => NO
NO. 1
[100000000000]
CUTTING NEEDLE SET
1 => USE, 0 => NO
NO. 1
[100000000000]
CUTTING NEEDLE SET
1 => USE, 0 => NO
NO. 1
[100000000000]
5 9
5 9
5 9